Kvh-industries KVH TracVision Bedienungsanleitung PDF herunterladen (Seite 20)

DO...

• DOremovethekeyfromtheignitionandremovethenegative

leadfromthevehicle’sbatterybefore connectingthereceiver

powercable.

• DOconnectthereceiverpowercable’sred(positive)wireto

+12VDCswitched(accessory)power.

• DOconnectthereceiverpowercable’sblack(negative)wiretoa

baremetalchassisground(suchasapillargroundscrew)within

18"ofthereceiver.

• DOusefire-resistantAWG8wire,installaprotectivefuse(rated

for6amps)within18"ofthebattery,andinstallarelay,switched

fromtheignition,betweenthebatteryandthereceiver,ifyouare

connectingthereceivertothebattery.

DO NOT...

• DO NOTconnectthereceivertounswitchedpower.

• DO NOTwireanyotherdevicetothesamepowercircuit.

• DO NOT connectthereceiverdirectlytothebatterywithout

followingtheadditionalstepsdescribedabove.

• DO NOTuseinadequateAWGwiring.

• DO NOT groundanyotherdeviceatthesamegroundingpointas

thereceiver.

Do’s and Don’ts - Power

Effective April 2004

Subject to change without notice

Do’s & Don’ts

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Keine Kommentare

Kvh-industries KVH TracVision Bedienungsanleitung Seite 20